ScribeRight

Job Setup

Project name Build profile

Existing jobs keep the original profile. Select the proposed assembly to review the raised base, backs and doors.

Example defaults only: 3000 mm available wall and ceiling, 2000 mm wardrobe width and height. Enter each job's actual measurements and customer choices. No 3D scan is used.

Selected ceiling height mm Customer's wardrobe height mm Selected carcass depth mm Available wall run mm Customer's wardrobe width mm

Bays Adjustable shelves per bay Fixed shelves per bay Board thickness mm Shelf clearance mm Adjustable shelf rear allowance mm (draft) Fixed shelf rear allowance mm (draft)

Shelf depth allowances are selected assumptions, not approved cutting or support rules.

Costing mode

Panel cost per m2 Finish allowance £ (manual) Labour hours Labour rate Hardware allowance Markup %

Phase 2 · customer journey

Tell the AI what wardrobe you want

Development preview. This currently uses rule-based parsing and simulated scan measurements; it does not claim a real AI or camera scan yet.

Customer request

Room scan development preview

These boxes temporarily stand in for measurements that the future 3D room scanner will provide automatically.

Usable wall width mm Floor-to-ceiling height mm Available depth mm

Development obstacle test

Temporary controls until the real scanner supplies room objects automatically.

Obstacle type Position from left mm Obstacle width mm

Scanner connection Development simulator Ready for test measurements 1. Ready → 2. Scan room → 3. Check scan → 4. Generate concept

Guided room survey · v1

Use tape or laser measurements. This browser survey does not infer dimensions from photos or use LiDAR / Apple RoomPlan.

Optional photos stay on this page only: no upload, no saved photo draft, no photos in exports. Reloading or closing loses them. Keep a separate durable reference or write a site note for every reading.

Raw site measurements

Enter nine readings in mm. Measure the available wall span at floor, halfway up, and at the planned wardrobe top—not at the ceiling unless the wardrobe reaches it. Enter the customer's wardrobe width separately. Each reading needs a method and photo or site-note reference. Earlier revisions are kept.

Depth readings are available wall-to-front space.

Location	Reading mm	Method	Photo / note reference

Site observations / obstructions Joiner / checker name

Opening width-

Clear height-

Gap above wardrobe-

Wall width outside wardrobe (total)-

Panels-

18 mm MDF area + 5%-

MDF finishPending

Current Blockers

Phase 1 Build Spec

Item	Status	Cut list	Note

Workflow

Build it in 2D

Change the measurements or bays on the left, then choose a step. This is a drawing preview, not a safe cutting or fixing plan.

Support-strip marks show your method, but they are not cut sizes. Rails, 9 mm back, plinth, scribes, doors, hinges and wall brackets are tracked in the Phase 1 build spec, not calculated as cut-list parts.

Elevation

Plan

Cut List

Part ID	Label	Type	Qty	Finished mm	Blank mm	Edges

MDF Finish

Quote Preview

Prices are user-entered only. This is not live supplier pricing or quote authority.